This handy tool lets you send a line level signal to two destinations with
transformer balancing and isolation for one or both of the outputs. The
balancing provides superior noise rejection when you have equipment
with unbalanced outputs that need to feed equipment with balanced
inputs. The transformer isolation helps eliminate unwanted hum and buzz
caused by power line and grounding issues.
In ISO mode the signal is passed directly through to one output
and transformer isolated to the second output.
In SPLIT mode the signal is transformer isolated to both outputs with a
resulting 6dB drop in level at each output.
A ground lift switch is provided for each output.
Both a female XLR and a 1/4" TRS jack are provided for the input signal.
Male XLR connectors are used for the output signals.
Input Impedance: 600 Ohms
Output Impedance: 600 Ohms (ISO mode) or 150 Ohms x 2 (SPLIT mode)
Input: -10dBm to +26dBm
Output: -10dBm to +26dBm (ISO mode), -16dBm to +20dBm (SPLIT mode)
Frequency Response: 20Hz-20kHz ±1dB