The MIX-6 is a broadcast-quality, 1U mixer with 4 reference-quality mic pre-amps, pan controls, 48V phantom power, and low-cut switches.
Its unique input flexibility can solve almost any mixing problem. Inputs 1-4 are capable of any combination of mic or line level, XLR or 1/4", balanced or unbalanced signals.
Aux 1 is a stereo RCA pair, and Aux 2 is a stereo 1/4" TRS pair (balanced or unbalanced). Additionally, Aux 2 is switchable to remove it from the output buss and patch it directly to the headphone out for monitoring a return or cueing a source signal. XLR and 1/4" TRS outputs are provided, with the XLR output switchable for mic or line level operation, and have individual drive circuits for isolation. The MIX-6 features a switchable stereo limiter and the internal power supply can be set for either 115 or 230VAC.
Frequency Response: 20Hz-20KHz ±0.8dB, 5Hz-40kHz ±3dB
Maximum Input Level: Line: +22dBu, Mic: -14dBu
Input Impedance: 10k Ohms
Low Cut Filter: 24dB per Octave, -3dB at 120Hz
Input Common Mode Rejection: 55dB at 60Hz
Maximum Output Level: +22dBu
Output Impedance: 47 Ohms
Signal To Noise Ratio:
Line Mode: 0dB input, 0dB gain,=92dB
Mic Mode: -40dB input, 46dB gain,=82dB
Rise Time: 8.6µS
Total Harmonic Distortion: 0.005%@1kHz
Power Requirements: 115/230VAC
Phantom Power: 48VDC
Mic/Line Switch: 36dB
Channel Gain: 20dB
Master Gain: 20dB
Total Gain: 76dB
Channel Separation: 60dB
Limiter Attenuation: 20dB
Headphone Impedance: 30 Ohms minimum