Whirlwind Line Mixers>
DA2 Distribution amp, 2 in x 4 out per each channel, or 1 in x 8 out
SPECIAL SHIPPING INSTRUCTIONS, ie., "leave on porch." Please enter your instructions.



Price: $ 399.95
Availability: in stock
Prod. Code: DA2

The DA-2 drives multiple isolated line feeds from a single input source. It is ideal for driving lines to multiple amps in live sound applications, distributing audio to multiple tape decks, feeding stereo signals to multiple zoned locations, etc. In normal (stereo) mode, the DA-2 provides four outputs per each of two inputs. A front panel COMBINE switch applies both inputs to all 8 outputs, making the DA-2 a one-or two-in, eight-out DA. Each output is ground lifted and has its own level control and clip indicator light. Input signals are monitored by signal-present LEDs and clip LEDs. The headphone circuit can be switched to monitor either channel. All audio connections are made through actively balanced line level XLR connectors.
Where transformer isolation is necessary, the ISO-8 (a 1U 8-channel accessory) is available.

Frequency Response: 20Hz-20kHz ±0.3dB Maximum Input level: +22dBu Input Impedance: 1M Ohm Common Mode Rejection: 90dB at 60Hz Maximum Output Level: +22dBu Output Impedance: 112 Ohm S/N at 0dB Input, 0dB Gain: 87dB Rise Time: 3µS Total Harmonic Distortion: 0.004% @ 1kHz Output Channel Separation: 74dB Headphone Impedance: 75 Ohm minimum Channel Output Gain: 18dB Power Requirements: 115/230VAC




Powered by CityMax.com