Whirlwind Press Systems>
PressPower 2 Pressbox without case, rackmount
SPECIAL SHIPPING INSTRUCTIONS, ie., "leave on porch." Please enter your instructions.



Price: $ 1,485.95
Availability: in stock
Prod. Code: PRESSPOWER 2 NC

The full-featured PRESSPOWER 2 is the successor to our original PRESSPOWER unit, the standard for press conferences worldwide. It features 2 mic/line inputs with individual gain controls and 16 transformer isolated outputs that are individually switchable for mic or line level operation. The PRESSPOWER 2 includes a 20-segment LED level meter, an internal test tone generator, a built-in headphone monitor amp with volume control, high-pass filters, and phantom power -- all conveniently front-panel accessible. The high-performance input stage provides clean audio even in high RF environments. The unit can be powered by 115/230VAC - 50/60Hz, by (4) 9V internal batteries or with an external DC supply (12 - 36VDC) connected via rear terminals. This allows the unit to be powered by a car battery, cigarette lighter, camera pack battery, etc. The unit will automatically switch to DC back-up power in the event of an AC power interruption. Additional active mic/line outputs can be added with optional 16 channel PRESS2XP expander module, giving you up to 48 total active outputs. Additional mic outputs can be achieved by adding passive PB Series Press Boxes to outputs set to line level. Frequency Response: -.5dBm 20Hz to -2dBm 16kHz Input Impedance: Mic: 1.5k ohms Line: 200k ohms Maximum Input Level: Mic: -5dBm Line: +50dBm Output Impedance: Mic: 150 ohms Line: 150 ohms Maximum Output Level: Mic: -5dBm into 2k ohms Line: +23dBm into 2k ohms Total Harmonic Distortion: .075% at 1kHz, mic @ unity gain Isolation Between Outputs: Mic: Greater than 95dBm Line: Greater than 60dBm Power Draw AC mode: 31W max. Power Draw DC mode: Condition Current (mA) Batt Life (hr. - approx.) LED meter off, no headphones 40 15 LED meter in dot mode, no headphones 73 9 LED meter off, 30 ohm headphones 60 10 LED meter in dot mode, 30 ohm headphones 94 5 Size (inside case): 20" X 9.5" X 8.5" 4RU removed from case.




Powered by CityMax.com